Sirius laser diode driver: the stack of boards on its base plate, the blue board with capacitors and a heatsink on top, the green terminal block and the D-Sub connector on the right.1 / 6
Sirius laser diode driver: the stack of boards on its base plate, the blue board with capacitors and a heatsink on top, the green terminal block and the D-Sub connector on the right.Sirius laser diode driver from the other end: the USB-C socket and the SMA jack on the board's edge, the toroid coils behind.Sirius laser diode driver: close-up of the D-Sub connector and the green power terminal block.Sirius laser diode driver: close-up of the board's edge with the USB-C socket, a pin header, a white connector and the SMA jack.Sirius laser diode driver: the basic board without the plug-on option boards.Sirius laser diode driver from above: the blue board over the basic board, the USB-C socket and SMA jack on the left.

Sirius Laser Diode Driver

Laser diode and temperature controller with USB control.

€399.00excl. VAT

Part no.: PD-01418

In stock · lead time 2 days

Specifications

Model
Sirius 500
Output current
0–500 mA
Supply voltage
12–36 VDC
Modulation
analogue, digital
Modulation bandwidth
up to 800 kHz
TEC power
up to 180 W
Temperature stability
0.005 °C
Operating modes
CW, APC, ACC
Interface
USB (Windows software, LabVIEW, DLL)
Protection
Overcurrent protection, temperature monitoring, interlock, soft start
Weight
approx. 200 g
Dimensions
124 × 81 × 36 mm