ARES laser diode driver: the black board on its base plate, seen at an angle from the front, with three blue trimmers, the red jumper and the status LEDs lit.1 / 6
ARES laser diode driver: the black board on its base plate, seen at an angle from the front, with three blue trimmers, the red jumper and the status LEDs lit.ARES laser diode driver fixed to an optical table with its two clamps and M6 screws.ARES laser diode driver from the front with a 6-pin plug in the socket at each end; the status LEDs are lit.ARES laser diode driver from its output side: the 6-pin socket, the pin headers and a clamp on the base plate.What's included with the ARES laser diode driver: the ARES, two 6-pin plugs, two clamps and a foil NTC.ARES laser diode driver from above, a clamp on each long side; dimension lines: length 75 mm, width 37 mm.

ARES Laser Diode Driver

€79.00excl. VAT

Part no.: PD-01359

Made to order · lead time approx. 7 days

Output current
125 mA / 500 mA / 2.5 A / 4.5 A
Input voltage
7–25 V DC (integrated step-down)
Modulation bandwidth
analog 600 kHz, TTL 50 kHz

Specifications

Output current
125 mA / 500 mA / 2.5 A / 4.5 A
Input voltage
7–25 V DC (integrated step-down)
Laser supply
5.1–14.1 V, adjustable
Modulation
analog and TTL, 0–5 V
Modulation bandwidth
analog 600 kHz, TTL 50 kHz
Switching times
on 2–5 µs, off 0.2–1.5 µs (laser lead 1 m)
Temperature sensor
NTC 10 kΩ
Connections
2 × 6-pin pluggable
Dimensions
75 × 37 mm
Mounting
2 clamps, hole spacing 50 mm
Conformity
CE (EMC 2014/30/EU)
Included
ARES, 2 plugs, 2 clamps, foil NTC

Features

  • Constant-current regulation
  • Analog and TTL modulation on one input
  • Interlock
  • Over-temperature cut-off, adjustable threshold
  • Beam suppression
  • Switch-on delay
  • Slot for the TEC driver